How to clean pneumatic engraving machine?

Blog Article

How to clean pneumatic engraving tool in the carving tools, reasonable cleaning pneumatic engraving machine is to maintain its stable performance and extend the service life of an important step, especially in the case of high frequency of use, cleaning and maintenance is particularly important. Since pneumatic engravers rely on compressed air for power, there are key components in their construction that are prone to accumulating dust, oil and engraving debris. Below is a comprehensive guide to cleaning your pneumatic engraver to help you keep your equipment in top condition.

I. Preparation before cleaning

Before you start cleaning, make the following preparations:

Turn off the power and air source：ensure that both the power and air sources to the pneumatic engraver are turned off. An unshut off air source may result in accidental startup and cause a safety hazard.

Preparation of Cleaning Tools：prepare the necessary cleaning tools such as soft brushes, lint-free cloths, cans of compressed air, appropriate amount of cleaner, lubricant and gloves. Cleaners should be specialized for metal and plastic parts, avoid using corrosive liquids.

Wear protective gloves：the use of protective gloves can avoid direct contact with the oil on the hands of machine parts, but also play a protective role.

2.clean the external surface

Cleaning the external surface of the pneumatic engraving machine can reduce the dust into the internal structure and reduce parts loss.

Wipe the machine body：Gently wipe the exterior of the pneumatic engraving machine with a lint-free cloth to remove dust and oil, avoiding too much force resulting in surface scratches. If there are stubborn stains, dip a small amount of cleaner to deal with them, and finally wipe clean with a dry cloth.

Cleaning the control panel：The control panel usually includes buttons and displays, use a soft bristle brush to gently sweep the surface dust, and then wipe it clean with a lint-free cloth, avoiding direct contact of liquid cleaners with the electronic control panel.

Cleaning Cables：Use a lint-free cloth to clean the dust and oil on the cables to avoid the cables accumulating dust leading to poor contact or poor heat dissipation.

3.internal cleaning

The interior of the pneumatic engraving machine is the top priority, engraving debris and airborne impurities are easy to accumulate in the interior, affecting the efficiency of machine operation.

Clean air motor：The core component of the pneumatic engraving machine is the air motor. Use a can of compressed air to blow away dust and debris from around the motor and ensure that the motor cooling holes are not blocked. It is recommended to blow the air from a certain distance to avoid excessive airflow directly on the parts.

Cleaning the air intake and exhaust ports：The air intake and exhaust ports of the pneumatic engraver tend to accumulate impurities. Use a soft-bristle brush to sweep dust from the air ports, and then blow with a can of compressed air to ensure that the air paths are clear and to prevent the airflow from being blocked.

Check the air tube：The air hose is the channel for compressed air transportation and should be kept clean and free of blockage. Regularly check whether there is debris or moisture in the air tube, and replace the air tube with a new one if necessary to prevent clogging or cracks leading to insufficient air pressure.

Clean the engraving tool and cutterhead chuck：Engraving tools and collets are prone to accumulating engraving debris, which affects engraving accuracy. Wipe the tool and collet with a lint-free cloth to remove surface oils and residues. For stubborn debris, use a cleaner wet cloth to clean up, and finally wipe clean with a dry cloth.

4.lubrication and maintenance

Proper lubrication can reduce wear and tear, enhance the precision of engraving, is one of the key steps in the cleaning process.

Lubricate the motor and air system：Drop a small amount of special lubricant for air tools into the air inlet of the motor, the lubricant will be transported to the inside of the motor through the compressed air, which will help to reduce friction and prolong the service life. Be careful to avoid excessive lubrication to prevent oil buildup.

Lubricate the tool chuck：The collet is the heart of the tool clamping system and will wear out after a long period of use. Place a drop of lubricant in the collet and rotate the tool to distribute the lubricant and ensure smooth loading and unloading of the tool. Avoid using lubricants that contain acid or corrosive ingredients that may damage metal parts.

Change the lubricant regularly：The lubricating oil of the pneumatic engraving machine will accumulate impurities if used for a long time, it is recommended to replace the lubricating oil every once in a while to keep the oil clean and ensure the smooth operation of the machine.

5.routine maintenance and precautions

Good cleaning habits and daily maintenance can effectively extend the life of the pneumatic engraving machine, enhance the engraving accuracy.

Regular cleaning：When the pneumatic engraving machine is used frequently, it is recommended to clean it once a week：if it is used less frequently, it can be cleaned once a month. Regular cleaning helps to prevent the accumulation of debris and dust and ensures that the machine is always in top condition.

Check for wear and tear on parts：When cleaning, check for visible wear and tear on all parts, especially the cutters and collets. Dull knives can affect engraving accuracy and should be replaced or sharpened regularly to ensure engraving results.

Keep the working environment clean：The working area where the pneumatic engraving machine is located should be kept as clean as possible to avoid excessive dust from entering the inside of the machine. You can cover the machine with a dust cover after use to prevent dust deposition.

Pay attention to the effect of moisture：Moisture can accelerate the oxidation of metal parts, especially when the pneumatic engraver uses compressed air, which may carry moisture. It is recommended to install a dehumidifier or filtration device on the air source to prevent water vapor from entering the air line.

Storage Precautions：When not in use for a long time, ensure that the engraving machine has been completely dry, no moisture, and then stored in a dry, ventilated environment, and regularly start running to prevent internal parts stagnation or rust corrosion

Report this page

HOW TO CLEAN PNEUMATIC ENGRAVING MACHINE?

How to clean pneumatic engraving machine?